Flush installation of panels with minor tolerances.
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of stainless steel.
Accesorii
Art.-Nr. 804063
CNC-adaptor
Art.-Nr. 061500
SBN 502
Art.-Nr. 535984
FZPB 11/21 CNC
Art.-Nr. 802339
DPL 11
Art.-Nr. 802507
MST-D
Art.-Nr. 802333
HVL 11
Art.-Nr. 803749
SGA-M6
Art.-Nr. 802506
STU 10-30
Art.-Nr. 802522
SGB/230V
Art.-Nr. 061502
BSN 100 VP
Art.-Nr. 060710
FZPB 11
Art.-Nr. 060713
FZPB 9
Avantajele / Descrierea produsului
The universal undercut anchor made of A4 stainless steel for natural stone.
Advantages
The flush-mounting technology of the undercut anchor allows an easy, economical handling of reveals.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
The concealed fixing solution for heavy natural stone façade panels using A4 stainless steel undercut anchors with flush installation. These are fixed with a consistent drill hole depth aligned to the back of the panel. This type of fixing technology is used, for instance, with calibrated façade panels or for reveal angle installation.
Aplicație și aprobare
Applications
Exterior façades
Interior façades
Façade reveals
Natural stone heating systems
Building materials
Natural stone (>20mm)
Artificial concrete panels
Puteți găsi informații detaliate despre materialele de construcție în documentul de înregistrare
Aprobări
ETA-11/0145
DoP No. 0307
Instrucțiuni de asamblare
Functionality
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor.
Wet diamond drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
