The fischer injection mortar FIS HB is a system component of the fischer Highbond-System FHB II for fixing maximum loads in non-cracked and cracked concrete. Railings, machines and steel constructions indoors and outside can be securely fixed with the fischer Highbond-System FHB II. The special mortar can be used with the conical highbond anchor FHB II-A S (standard version), highbond anchor FHB II-A L (long version) in various steel qualities.
The Highbond system FHB II achieves the highest load values in cracked concrete. This means that fewer fixing points and smaller anchor plates are required.
The injection mortar FIS HB can be worked with the threaded rod FHB II-A S (short version ) or L (long version). Thus, you can select the most economical solution based on requirements.
The large container shape of the injection mortar FIS HB is ideally suited to series installation.
Upotreba i atesti
Applications
Guard rails
Façades
Staircases
Steel brackets
Machines
Silo installations
Masts
Rash protection
Steelwork constructions
Timber constructions
Building materials
Approved for:
Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
Concrete C12/15
Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.
Atesti
ETA-05/0164
ETA-16/0637
ETA-21/0948
ETA-06/0171
DoP No. 0282
DoP No. 0293
DoP No. 0327
DoP No. 0353
DoP No. 0281
EPD-Kiwa-EE-000431-EN
Uputstva za montažu
Functionality
The injection mortar FIS HB is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when dispensed through the injection cartridge.
FIS HB can be used with the threaded rods FHB II-A S and FHB II-A L and glues the threaded rod completely in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.
Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)
Environmental Product Declaration (EPD) for fischer injection mortars based on vinyl ester resin - FIS V Plus, FIS VW Plus, FIS VS Plus, FIS VL, T-Bond Pro.1, FIS AB, FIS C 700 HP Pro.1, FIS HT II, FIS HB, FIS SB, FIS RC II, FIS RC II Low Speed
